KTM F5375T5 страница 128 Скачать руководство пользователя

Страница: 128 / 287

10 RIDING INSTRUCTIONS

126

10.9

Refueling

Danger

Fire hazard

Fuel is highly flammable.

The fuel in the fuel tank expands when warm and can escape if overfilled.

–

Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.

–

Switch off the engine for refueling.

–

Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.

–

If any fuel is spilled, wipe it off immediately.

–

Observe the specifications for refueling.

Warning

Danger of poisoning

Fuel is poisonous and a health hazard.

–

Avoid skin, eye and clothing contact with fuel.

–

Immediately consult a doctor if you swallow fuel.

–

Do not inhale fuel vapors.

–

In case of skin contact, rinse the affected area with plenty of water.

–

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

–

Change your clothing in case of fuel spills on them.

Note

Material damage

Inadequate fuel quality causes the fuel filter to quickly become clogged.

Содержание F5375T5
































































































































































































































































































Результаты поиска

Содержание F5375T5

Отзывы:

Похожие инструкции для F5375T5

Бренды по названию

Популярные бренды

KTM F5375T5, Руководство пользователя

Результаты поиска

Содержание F5375T5

Отзывы:

Похожие инструкции для F5375T5

Бренды по названию

Популярные бренды