KTM F4303U1 Скачать руководство пользователя страница 88

Страница: 88 / 130

15 ELECTRICAL SYSTEM

S04756-10

To change the fuse of the ABS hydraulic unit:

–

Take off the protection cap and remove fuse

Info

A faulty fuse has a burned-out fuse wire

Warning

Fire hazard

Incorrect fuses overload the electrical

system.

–

Only use fuses with the required ampere value.

–

Do not bypass or repair fuses.

–

Insert the spare fuse with the correct rating.

Fuse (75011088010) (

p. 112)

Tip

Insert spare fuse

in the fuse box so that it is

available if needed.

–

Mount the protection cap.

S04756-11

To change the fuse of the ABS return pump:

–

Take off the protection cap and remove fuse

Info

A faulty fuse has a burned-out fuse wire

Warning

Fire hazard

Incorrect fuses overload the electrical

system.

–

Only use fuses with the required ampere value.

–

Do not bypass or repair fuses.

–

Insert the spare fuse with the correct rating.

Fuse (90111088025) (

p. 112)

Tip

Insert spare fuse

in the fuse box so that it is

available if needed.

–

Mount the protection cap.

Finishing work

–

Mount the passenger seat. (

p. 58)

Содержание F4303U1



































































































































Результаты поиска

Содержание F4303U1

Отзывы:

KTM F4303U1, Руководство пользователя, Страница: 88 / 130

Результаты поиска

Содержание F4303U1

Отзывы: