KTM F4175T2 Скачать руководство пользователя страница 41

Страница: 41 / 242

CONTROLS 6

Warning

Danger of poisoning

Fuel is poisonous and a health hazard.

–

Avoid skin, eye and clothing contact with fuel.

–

Immediately consult a doctor if you swallow fuel.

–

Do not inhale fuel vapors.

–

In case of skin contact, rinse the affected area with plenty of water.

–

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

–

Change your clothing in case of fuel spills on them.

–

Keep fuels correctly in a suitable canister, and out of the reach of children.

Note

Environmental hazard

Improper handling of fuel is a danger to the environment.

–

Do not allow fuel to enter the groundwater, the soil, or the sewage system.

K00724-10

–

Lift cover

of the fuel tank filler cap and insert the ignition

key into the lock.

Note

Danger of damage

The ignition key may break if overloaded.

Damaged ignition keys must be replaced.

–

Push down on the fuel tank filler cap to take pressure off
the ignition key.

–

Turn the ignition key 90° clockwise.

–

Lift the fuel tank filler cap.

Содержание F4175T2



















































































































































































































































Результаты поиска

Содержание F4175T2

Отзывы:

Бренды по названию

Популярные бренды

KTM F4175T2, Руководство пользователя

Результаты поиска

Содержание F4175T2

Отзывы:

Бренды по названию

Популярные бренды