KTM F3001U6, Руководство пользователя, Страница: 68 / 109

14 BRAKE SYSTEM
66
Q00414-10
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
1
.
–
Take off cover
2
with membrane
3
.
–
Correct the brake fluid level.
Guideline
Brake fluid level below reser-
voir rim 5 mm (0.2 in)
Brake fluid DOT 4 / DOT 5.1 ( p. 98)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Immediately clean up any brake fluid that has over-
flowed or spilled using water.
14.7 Checking the front brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
M01729-10
–
Check the brake linings for minimum thickness
A
.
Minimum thickness
A
≥
1 mm (
≥
0.04 in)
» If the minimum thickness is less than specified:
–
Change the brake linings of the front brake.
(
p. 66)
–
Check the brake linings for damage and cracking.
» If damage or wear is encountered:
–
Change the brake linings of the front brake.
(
p. 66)
14.8 Changing the brake linings of the front brake
Warning
Danger of accidents Incorrect servicing will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized KTM workshop
will be glad to help.)