KTM 990 Adventure AUS 2009, Руководство пользователя

Страница: 186 / 213

Screw, cylinder head M10 Step 1
25 Nm (18.4 lbf ft)
Step 2
38 Nm (28 lbf ft)
Stud, cylinder head in engine case M10 20 Nm (14.8 lbf ft)
–
Oil pressure sensor M10x1 10 Nm (7.4 lbf ft)
–
Screw, conrod bearing M10x1 Step 1
25 Nm (18.4 lbf ft)
Step 2
30 Nm (22.1 lbf ft)
Step 3
60°
–
Coolant temperature sensor M12x1.5 12 Nm (8.9 lbf ft)
–
Plus, cylinder head (2nd cylinder) M12x1.5 25 Nm (18.4 lbf ft)
–
Spark plug M12x1.5 12 Nm (8.9 lbf ft)
–
Plug, oil filter housing M14x1.5 15 Nm (11.1 lbf ft)
Bleeder flange, generator cover M16x1.5 10 Nm (7.4 lbf ft)
Plug, timing-chain tensioner M16x1.5 20 Nm (14.8 lbf ft)
–
Rotor screw M16x1.5 150 Nm (110.6 lbf ft)
Nut, balancer shaft M20x1.5 120 Nm (88.5 lbf ft)
Nut, engine sprocket M20x1.5 100 Nm (73.8 lbf ft)
Screw-in fitting, cooling system M20x1.5 10 Nm (7.4 lbf ft)
Nut, inner clutch hub M22x1.5 130 Nm (95.9 lbf ft)
Oil drain plug with magnet M22x1.5 35 Nm (25.8 lbf ft)
–
Screw in generator cover M24x1.5 8 Nm (5.9 lbf ft)
–
Nut, primary gear M33LHx1.5 130 Nm (95.9 lbf ft)