CONTROLS 6
17
6.4.2
Light switch
F01886-10
The light switch
1
is fitted on the combination switch on the
left.
Possible states
Low beam on
–
Light switch in position
A
. In this
position, the low beam and the tail light are switched
on.
High beam on
–
Push the light switch to position
B
.
In this position, the high beam and the tail light are
switched on.
Headlight flasher
–
Push the light switch into posi-
tion
C
.
6.4.3
Cruise control system tip switch
V01193-10
The cruise control system tip switch
1
is fitted on the left side of
the combination switch.
Info
The cruise control system function (optional) must be acti-
vated to be able to use the cruise control system.
Possible states
• Cruise control system tip switch
in the basic position.
• Cruise control system tip switch
pressed to the left.
–
In
this position, the cruise control system function is switched
on and off. The operating mode is displayed in the combina-
tion instrument.
• Briefly press cruise control system tip switch
at the top.
–
The last saved speed is reached and maintained. Every sub-
sequent brief pressing increases the target speed by 1 km/h
or 1 mph.
• Press and hold cruise control system tip switch
at the top.
–
The target speed increases in increments of 5 km/h or
5 mph.
• Briefly press cruise control system tip switch
at the bot-
tom.
–
The cruise control system function is activated and
the current speed is maintained. Every subsequent brief press
reduces the target speed by 1 km/h or 1 mph.
• Press and hold cruise control system tip switch
at the bot-
tom.
–
The target speed decreases in increments of 5 km/h or
5 mph.
Info
After activation of the cruise control system function, the
throttle grip can be turned back to the basic position. The
selected speed will be maintained.
If the target speed is exceeded for less than 30 seconds by
turning the throttle grip, the cruise control system remains
activated.
To switch off the cruise control system function, press the
cruise control system tip switch
to the left.
