5
ENGLISH
Scope of supply
1x throttle grip (right)
1x
fi
xed grip (left)
1x cam, black, small (4-stroke and 2-stroke TPI)
1x cam, gray, small (4-stroke and 2-stroke TPI)
1x cam, black, large (2-stroke carburetor)
Assembly, left-hand side
- Release screw
.
- Remove original
fi
xed grip.
- Position
fi
xed grip
(included).
“READY TO RACE”
must be positioned facing upward.
- Tighten screw
to 5 Nm (Loctite 243).
Assembly, right-hand side
NOTE
The basic procedure is the same for the different throttle grips of the
2 and 4-stroke models.
- Push back sleeve
.
- Remove screws
.
- Remove thrust half-washers
(1
.
- Detach the throttle cables and take off the original throttle.
