KTM 790 DUKE 2018, Инструкции по установке

Страница: 14 / 19

3 WORK
12
3.9 Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle perpendicular to the wall at a distance
A
from the wall and switch on the low beam.
Guideline
Distance
A
5 m (16 ft)
–
The rider now mounts the motorcycle with luggage and passen-
ger if applicable.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark-
ing when the motorcycle is ready to operate with the rider
mounted along with any luggage and a passenger if applica-
ble.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. ( p. 12)
3.10 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 12)
V01212-10
Main work
–
Turn adjusting screw
1
to adjust the headlight range.
Info
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
Screw
1
also secures the headlight. Ensure the screw
is always screwed in far enough.
400726-11
–
Set the headlight to marking
B
.
Guideline
The light-dark boundary must lie exactly on the lower mark-
ing
B
when the motorcycle is ready for use with the rider
mounted along with any luggage and a passenger if applica-
ble.