WORK
5
3WORK
3.1
Removing the seat
100108-10
–
Insert the ignition key in the seat lock
and turn it 45° counterclockwise.
–
Lift up the seat at the rear, pull it back and remove from above.
3.2
Mounting the seat
400155-01
–
Suspend the seat on the screw
, press the rear downwards and at the same time
push it forwards. The two projections
must be inserted into the frame.
–
Push the locking pin
into the lock housing and push the back of the seat down
until the locking pin locks in place with an audible click.
–
Remove the ignition key from the seat lock.
–
Finally, check that the seat is correctly mounted.
3.3
Reinstalling the fuel tank
–
Remove the seat. (
100173-10
–
Remove screw
.
Info
The fuel lines do not need to be disconnected.
100174-10
–
Lay a cloth
over the subframe and straighten the steering.
–
Carefully raise the fuel tank and move it backwards.
–
Place the fuel tank on the vehicle so that the left spoiler is still lying on the com-
pensating tank
(see illustration). Place a cloth
between the compensating
tank and the spoiler to prevent damage.
3.4
Positioning the fuel tank
100174-11
–
Remove the cloth
from between the compensating tank and the spoiler.
