KTM 690 Enduro R USA, Руководство пользователя, Страница: 144 / 207

14 ELECTRICAL SYSTEM
142
601795-10
Main work
–
Remove the screw on the rear of the turn signal housing.
–
Tilt headlamp diffuser

forward carefully and take it off.
–
Lightly squeeze the orange plug  in the area of the holding lugs and take it off.
–
Press the turn signal bulb carefully into the socket, turn it counterclockwise by about
30°, and take it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
–
Press the new turn signal bulb carefully into the socket and turn it clockwise until it
stops.
Turn signal (R10W / socket BA15s) ( p. 186)
–
Mount the orange plug.
–
Position the diffuser.
–
Insert the screw and turn it counterclockwise first until it engages in the thread. Tighten
the screw slightly.
Finishing work
–
Check that the turn signal system is functioning properly.