KTM 690 Enduro R EU, Руководство пользователя

Страница: 69 / 105

MAINTENANCE WORK ON CHASSIS AND ENGINE
67
8.83
Checking engine oil level
Info
The engine oil level can be checked on a cold or hot engine.
–
Stand the motorcycle upright on a horizontal surface.
400304-10
Conditions
The engine is at operating temperature.
–
Check the engine oil level.
The engine oil reaches the top of the viewer

.
» When the engine oil does not reach the top of the viewer:
–
Top up the engine oil. ( P. 71)
8.84
Changing engine oil and oil filter, cleaning oil screen
x
–
Remove the motor guard. ( P. 58)
–
Drain the engine oil. ( P. 67)
–
Remove the oil filter. ( P. 68)
–
Clean the oil screen. ( P. 69)
–
Mount the oil filter. ( P. 70)
–
Fill up with engine oil. ( P. 70)
–
Mount the motor guard. ( P. 59)
8.85
Draining the engine oil
x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard
Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
Info
Drain the engine oil only when the engine is warm.
–
Stand the motorcycle on its side stand on a horizontal surface.
600075-10
–
Place a suitable container under the engine.
–
Remove the oil drain plug

and the seal ring.
–
Completely drain the engine oil.
–
Thoroughly clean the oil drain plug with a magnet.
–
Clean the sealing area on the engine.
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Fit oil drain plug

with seal ring and tighten it.
Specification
Oil drain plug with magnet M12x1.5 20 Nm
(14.75 lbf ft)