KTM 690 Enduro R EU, Руководство пользователя

Страница: 57 / 105

MAINTENANCE WORK ON CHASSIS AND ENGINE
55
8.61
Removing the seat
600047-10
–
Lift the quick-locking clip

and rotate in the direction of the arrow.
600048-10
–
Carefully push the seat to the rear and remove it.
8.62
Mounting the seat
600069-10
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Put down the seat and fit it into the collar sleeves

of the fuel tank at the rear.
Push the seat forward at the same time.
–
Push the seat down at the front, lift the quick release bracket

and turn it in the
direction of the arrow until it engages.
–
Make sure that the seat is correctly locked in.
8.63
Removing the front fuel tank
Danger
Fire hazard Fuel can easily catch fire.
–
Never fill up the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
–
Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See specifications on filling up with fuel.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid contact between fuel and skin, eyes and clothing. Do not inhale fuel vapors. If fuel gets into your eyes, rinse immedi-
ately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If fuel is swallowed, con-
tact a doctor immediately. Change clothing that has come into contact with fuel. Store fuel in a suitable canister according
to regulations and keep it out of the reach of children.
–
Remove the trim. ( P. 54)
–
Remove the seat ( P. 55)
600087-10
–
Pull off the fuel tank breathers

.
–
Remove screws

.