KTM 690 Enduro AUS 2010, Руководство по ремонту, Страница: 44 / 265

04/SHOCK ABSORBER, SWINGARM
42
8.4
Measuring the unloaded rear wheel sag
–
Raise the motorcycle with the lift stand. ( p. 9)
0 0 A A
400988-10
–
Measure the vertical distance between the rear axle and a fixed point such as a
marking on the side cover.
–
Note down the value as dimension

.
–
Remove the motorcycle from the lift stand. ( p. 9)
8.5
Checking the static sag of the shock absorber
0 0 A A
0 0 B B
400989-10
–
Measure distance

of rear wheel unloaded. ( p. 42)
–
Hold the motorcycle upright with the aid of an assistant.
–
Measure the distance between the rear axle and the fixed point again.
–
Note down the value as dimension

.
Info
The static sag is the difference between measurements

and

.
–
Check the static sag.
(690 Enduro)
Static sag 25 mm (0.98 in)
(690 Enduro R)
Static sag 25 mm (0.98 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber. ( p. 43)
8.6
Checking the riding sag of the shock absorber
0 0 A A
0 0 C C
400990-10
–
Measure distance

of rear wheel unloaded. ( p. 42)
–
With another person holding the motorcycle, the rider, wearing full protective cloth-
ing, sits on the seat in a normal sitting position (feet on footrests) and bounces up
and down a few times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear axle and a fixed point.
–
Note down the value as dimension

.
Info
The riding sag is the difference between measurements

and

.
–
Check the riding sag.
(690 Enduro)
Riding sag 70… 80 mm (2.76… 3.15 in)
(690 Enduro R)
Riding sag 70… 80 mm (2.76… 3.15 in)
» If the riding sag differs from the specified measurement:
–
Adjust the riding sag. ( p. 43)