KTM 690 Enduro AUS 2008, Руководство по ремонту

Страница: 136 / 231

30/ENGINE - WORK ON INDIVIDUAL PARTS
134
19.39
Checking electric starter drive
5 5
6 6
1 1
2 2
4 4
3 3
300129-01
–
Check the teeth and seating of the starter idler gear

for damage and wear.
» If there is damage or wear:
–
Replace the starter idler gear and/or needle bushing.
–
Check the teeth and seating of the torque limiter

for damage and wear.
» If there is damage or wear:
–
Replace the torque limiter and/or needle bushing.
–
Check freewheel gear

and bearing when removed for damage and wear.
» If there is damage or wear:
–
Replace the freewheel gear and/or the bearing.
–
Check the freewheel

when removed for damage and wear.
» If there is damage or wear:
–
Replace the freewheel.
–
Check the toothing of the starter motor

for damage and wear.
» If there is damage or wear:
–
Replace the starter motor.
–
Clamp the minus (negative) cable of a 12 Volt power supply to the starter motor housing. Briefly connect the plus (positive) cable
of the power supply to the starter motor connection.
» If the starter motor does not turn when you close the power circuit:
–
Replace the starter motor.
–
Replace the O-ring

of the starter motor.
19.40
Removing freewheel
300127-10
–
Extract the lock ring

from the groove using suitable pliers.