KTM 65 SX 2020, Руководство пользователя

Страница: 108 / 119

20 TECHNICAL DATA
106
Ground clearance unloaded 280 mm (11.02 in)
Weight without fuel, approx. 53 kg (117 lb.)
Maximum rider weight 50 kg (110 lb.)
20.8 Tires
Front tire Rear tire
60/100 - 14 30M TT
Maxxis MAXX CROSS SI
80/100 - 12 41M TT
Maxxis MAXX CROSS SI
The tires specified represent one of the possible series production tires. Additional information is available in
the Service section under:
http://www.ktm.com
20.9 Chassis tightening torques
Screw, brake line bracket EJOT 1.7 Nm (1.25 lbf ft)
Spoke nipple M3.5 3 Nm (2.2 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, ball joint of push rod on
foot brake cylinder M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, chain sliding guard M6 10 Nm (7.4 lbf ft)
Screw, fender M6 6 Nm (4.4 lbf ft)
Screw, foot brake cylinder M6 10 Nm (7.4 lbf ft)
Screw, fork stub M6 10 Nm (7.4 lbf ft)
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite ® 243™
Screw, front brake linings M6 10 Nm (7.4 lbf ft)
Screw, rear brake disc M6 14 Nm (10.3 lbf ft)
Loctite ® 243™
Screw, rear brake lining M6 10 Nm (7.4 lbf ft)
Screw, throttle grip M6 4.5 Nm (3.32 lbf ft)
Start number plate screw M6 4 Nm (3 lbf ft)
Fitting, engine mounting bracket M8 30 Nm (22.1 lbf ft)
Nut, rim lock M8 10 Nm (7.4 lbf ft)
Remaining nuts, chassis M8 25 Nm (18.4 lbf ft)
Remaining screws, chassis M8 25 Nm (18.4 lbf ft)
Screw, bottom triple clamp M8 15 Nm (11.1 lbf ft)
Screw, engine bracket M8 30 Nm (22.1 lbf ft)
Loctite ® 2701™
Screw, front brake caliper M8 20 Nm (14.8 lbf ft)
Loctite ® 243™
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft)
Screw, rear brake caliper M8x20 18 Nm (13.3 lbf ft)
Loctite ® 243™
Screw, rear brake caliper M8x40 18 Nm (13.3 lbf ft)
Loctite ® 243™