KTM 65 SX 2012, Руководство пользователя

Страница: 21 / 88

SERVICE SCHEDULE
19
8.1
Service schedule
S10N S20A S40A S80A J1A
Change the gear oil.
x
( p. 64) • • •
Check the gear oil level. ( p. 64) • • •
Check the front brake linings. ( p. 47) • • • •
Check the rear brake linings. ( p. 52) • • • •
Check the brake discs. ( p. 45) • • • •
Check brake lines for damage and leakage. • • • •
Change the sealing sleeves of the foot brake cylinder.
x
• • •
Change the rear brake fluid.
x
•
Check the rear brake fluid level. ( p. 50) • • • •
Check the free travel of the foot brake lever. ( p. 49) • • • •
Check the frame and swingarm.
x
• • •
Check swingarm bearing. x
• • •
Check the heim joints on the upper and lower shock absorbers. x
• • •
Service the fork.
x
• •
Service the shock absorber.
x
• •
Check the tire condition. ( p. 57) • • • •
Check the tire air pressure. ( p. 57) • • • •
Check wheel bearing for play.
x
• • •
Check the wheel hub.
x
• • •
Check rim run-out.
x
• • • •
Check the spoke tension. ( p. 57) • • • •
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 40) • • • •
Check the chain tension. ( p. 39) • • • •
Lubricate all moving parts (e. g. hand levers, chain, ...) and check for smooth opera-
tion.
x
• • • •
Change the hydraulic clutch fluid.
x
( p. 44) •
Check the fluid level of the hydraulic clutch. ( p. 44) • • • •
Change the front brake fluid. x
•
Check the front brake brake fluid level. ( p. 46) • • • •
Check the free travel of the hand brake lever. ( p. 45) • • • •
Grease the steering head bearing.
x
( p. 32) •
Check play of steering head bearing. ( p. 31) • • • •
Change the spring of the exhaust control. x
• •
Change the piston. x
• •
Change the connecting rod, conrod bearing and crank pin.
x
• •
Change the crankshaft bearing.
x
• •
Check the transmission and shift mechanism.
x
• •
Change all engine bearings.
x
•
Change the spark plug.
x
• • •
Change the spark plug connector. x
• •
Check the cylinder and piston. x
• • •
Check the intake membrane. x
• • •
Check the exhaust control for functioning and smooth operation.
x
• • •
Check the clutch.
x
• • •
Check all hoses (e. g. fuel, cooling, bleeding, drainage) and sleeves for tearing, tight-
ness and correct routing.
x
• • • •
Check the antifreeze and coolant level. ( p. 59) • • • •
Check the cables for damage and routing without sharp bends.
x
• • • •
Check the cables for damage, routing without sharp bends and correct adjustment. • • • •