ENGLISH
6
Hand brake lever
The hand brake lever
1
is mounted on the handlebar on the right and
actuates the front wheel brake.The adjusting screw
B
is used to change the
original position of the hand brake lever (see maintenance work on chassis
and engine).
Choke lever
If the choke lever
2
is pulled backwards, a bore will be opened in the car-
buretor through which the engine may draw in additional fuel. This produ-
ces a „rich“ fuel/air mixture necessary for cold start. If the choke lever is
pushed forward up to the stop, the bore will be closed again. In this posi-
tion the choke cable must have a play of approx. 2 mm.
Ignition lock with 3 switch positions
Switch positions of ignition lock
Ignition off, (engine can't be started)
Ignition on, (engine can be started)
Ignition off, handlebar blocked
To switch the ignition to position
turn the ignition key to position
and firmly press it into the lock. Turn the handlebar all the way to
the left, then turn the ignition key to the left.
The ignition key can be withdrawn in position
and
.
1
2
B
Содержание 640 LC4 Adventure 2002
