ENGLISH
39
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
Insert the new lamp such that the noses
[1]
engage in the recesses
[2]
.When
doing so, do not touch the glass body of the lamp so that it remains free from
fat. Engage retaining clip, mount rubber cap and connector. If the parking-
light lamp is to be replaced, simply insert it in the holder. Reinsert the park-
ing-light lamp together with the holder.
Engage the bottom end of the headlamp mask at the retaining pins and fix
the mask by means of the rubber bands.
Exchanging the brake light and tail light bulb (SXC)
Remove the cap
[3]
on the underside of the license plate retainer.
Turn the lamp socket
[4]
approximately 30° counterclockwise and pull it out
of the tail light housing.
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out
of the socket.
To mount the lamp reverse the worksteps indicated above.
NOTE: Since the bulb on the tail end is subjected to higher vibrations, heavy-
duty bulbs are available from your KTM dealer.
Exchanging the brake light and tail light bulb (SMC)
Remove seat.
Disengage retaining clip
[5]
and take bulb out of reflector. When changing
the brake-light lamp, simply pull it out of the holder.
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out
of the socket.
To mount the lamp reverse the worksteps indicated above.
When changing the tail-light lamp
[6]
, simply pull it out of the holder.
5
6
6
1
2
3
4
