01/FORK, TRIPLE CLAMP
12
201180-10
–
Pull inner tube
with piston rod
out of the outer tube.
Info
If the damping bush
remains in the outer tube, remove it as well.
201181-10
–
Remove lock ring
.
–
Remove seal ring
.
–
Remove washer
.
201182-10
–
Remove washer
from the outer tube.
4.6
Checking the fork legs
Condition
The fork legs are disassembled.
201190-10
–
Check the inner tube
for damage.
» If there is damage:
–
Change the inner tube.
–
Check the outer tube
for damage.
» If there is damage:
–
Change the outer tube.
–
Check the spring length.
Guideline
Spring length with preload bush(es)
347… 353 mm (13.66… 13.9 in)
» If the measured value is greater than the specified value:
–
Reduce the thickness of the preload spacer.
» If the measured value is less than the specified value:
–
Increase the thickness of the preload spacer.
200684-10
–
Measure the outside diameter at several locations on the inner tube.
Outside diameter of the inner tube
31.936… 31.975 mm (1.25732…
1.25886 in)
» If the measured value is less than the specified value:
–
Change the inner tube.
PartShark.com
877-999-5686