KTM 50 SX 2020 страница 59 Скачать руководство пользователя

Страница: 59 / 141

SERVICE WORK ON THE CHASSIS 11

11.23

Mounting the seat

H01431-10

–

Hook the seat onto screw

, lower the seat at the rear, and

push it forward.

Holding lug

hooks into the fuel tank.

H00066-11

–

Close quick release

11.24

Removing the air filter

Note

Engine damage

Unfiltered intake air has a negative effect on the service life of the engine.

Dust and dirt will enter the engine without an air filter.

–

Never start to use the vehicle without an air filter.

Note

Environmental hazard

Hazardous substances cause environmental damage.

–

Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.

Preparatory work

–

Remove the seat. (

p. 56)

H01432-10

Main work

–

Press rear holding lug

together slightly and swing the air

filter box cover upward.

–

Pull out the front holding lug and take off the air filter box
cover.

–

Take off the air filter.

Содержание 50 SX 2020














































































































































Результаты поиска

Содержание 50 SX 2020

Отзывы:

Похожие инструкции для 50 SX 2020

Бренды по названию

Популярные бренды

KTM 50 SX 2020, Руководство пользователя

Результаты поиска

Содержание 50 SX 2020

Отзывы:

Похожие инструкции для 50 SX 2020

Бренды по названию

Популярные бренды