manualshive.com logo in svg

KTM 50 SUPERMOTO, Руководство пользователя

Поделиться
Скачать
KTM 50 SUPERMOTO Скачать руководство пользователя страница 30

MAINTENANCE WORK ON CHASSIS AND ENGINE 

»

ENGLISH

29

Checking the gear oil level

To check the gear oil level, first remove the plug 

[1]

. With the motorcycle parked

in an upright position, a small quantity of oil should flow out of the indicator

opening 

[2]

. If oil must be added, tilt the motorcycle and pour automatic gear

oil (Motorex ATF Super) into the bore.

LESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
THEREFORE, ONLY USE BRANDED PRODUCTS (MOTOREX ATF SUPER).

Changing gear oil *

The engine must be warmed up before changing the gear oil. Park the motor-

cycle on a horizontal surface, remove the oil drain plug 

[3]

and drain the used

oil into an appropriate container. Clean the sealing surface, mount the oil drain

plug together with the gasket and tighten to 15 Nm.

Remove stopper 

[4]

and fill in 0.15 liters of automatic gear oil (Motorex ATF

Super). Mount the stopper and check the engine for tightness.

LESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
THEREFORE, ONLY USE BRANDED PRODUCTS (MOTOREX ATF SUPER).

2

1

3

4

Содержание 50 SUPERMOTO











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды