KTM 450 XC-W USA, Инструкции по установке

Страница: 12 / 31

3 WORK
10
M00188-11
–
Position the headlight mask and fix it with rubber straps

.
Info
Ensure the holding lugs engage in the fender.
–
Position the brake line and wiring harness. Put the clamp on and mount and
tighten screw

.
K00143-11
(XC
‑
W)
–
Connect plug-in connector

.
K00151-11
–
Position the headlight mask and fix it with rubber straps

.
Info
Ensure the holding lugs engage in the fender.
–
Position the brake line and wiring harness. Put the clamp on and mount and
tighten screw

.
Finishing work
–
Check the headlight setting. ( p. 10)
3.5 Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
–
Make another mark a distance

under the first mark.
Guideline
Distance

5 cm (2 in)
–
Position the vehicle vertically at a distance

away from the wall.
Guideline
Distance

5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. ( p. 11)