KTM 390 Duke 2015 COL Скачать руководство пользователя страница 41

Страница: 41 / 182

CONTROLS

6.11.11 Riding time/average speed menu

401334-01

Condition
Alternative 1

• The ignition is on.
• The motorcycle is stationary.

Alternative 2

• The ignition is on.
• The motorcycle is moving.

–

Press the

SET

button briefly and repeatedly until the desired info display appears.

The riding time and average speed are displayed in this menu.

Info

If the ignition was switched off for over 60 minutes, the display is reset to 0.

Press the

SET

button

briefly.

Next display mode on the info display

6.11.12 Average speed/average fuel consumption 1 menu

401465-01

Condition
Alternative 1

• The ignition is on.
• The motorcycle is stationary.

Alternative 2

• The ignition is on.
• The motorcycle is moving.

–

Press the

SET

button briefly and repeatedly until the desired info display appears.

In this menu, the average speed and the average fuel consumption 1 are displayed in
L/100 km (or L/100 miles).

Содержание 390 Duke 2015 COL























































































































































































Результаты поиска

Содержание 390 Duke 2015 COL

Отзывы:

Бренды по названию

Популярные бренды

KTM 390 Duke 2015 COL, Руководство пользователя

Результаты поиска

Содержание 390 Duke 2015 COL

Отзывы:

Бренды по названию

Популярные бренды