KTM 350 EXC-F AUS 2012, Руководство по ремонту

Страница: 35 / 292

01/FORK, TRIPLE CLAMP
33
101329-10
–
Remove O-ring
4
. Remove protective ring
5
.
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
5.24
Installing the lower triple clamp (EXC
‑
F EU/AUS/USA, XCF
‑
W)
0 0 2 2
0 0 1 1
0 0 3 3
101330-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease ( p. 270)
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the top steering head seal
1
is correctly positioned.
–
Slide on protective ring
2
and O-ring
3
.
101427-10
–
Position the upper triple clamp with the steering.
–
Mount screw
4
but do not tighten yet.
–
Position the clutch line, wiring harness, and voltage regulator. Mount and tighten
screws
5
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
101332-10
–
Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
6
toward the front.
101333-10
(XCF
‑
W, EXC
‑
F EU/AUS)
–
Tighten screws
7
.
Guideline
Screw, bottom triple clamp M8 15 Nm
(11.1 lbf ft)