KTM 350 EXC-F 2017, Руководство пользователя, Страница: 47 / 129

11 TUNING THE CHASSIS
45
11.6 Measuring the rear wheel dimension unloaded
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 50)
402415-10
Main work
–
Position the sag gauge in the rear axle and measure the distance to marking SAG on
the rear fender.
Sag gauge (00029090100)
Pin for sag gauge (00029990010)
–
Note down the value as dimension

.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 50)
11.7 Checking the static sag of the shock absorber
402416-10
–
Measure dimension

of rear wheel unloaded. ( p. 45)
–
Hold the motorcycle upright with the aid of an assistant.
–
Again measure the distance between the rear axle and marking SAG on the rear
fender using the sag gauge.
–
Note down the value as dimension

.
Info
The static sag is the difference between measurements

and

.
–
Check the static sag.
Static sag 35 mm (1.38 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber. ( p. 46)