KTM 350 EXC-F 2015, Руководство пользователя, Страница: 88 / 122

15 ELECTRICAL SYSTEM
86
15.5 Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. ( p. 56)
M00186-10
Main work
–
Open fuse box cover  .
M00187-10
–
Remove the defective fuse.
Guideline
Fuse
1
- 10 A - EFI control unit
Fuse 2 - 10 A - fuel pump
Fuse 3 - 10 A - ignition
Fuse 4 - 10 A - high beam, low beam, parking light, tail light, license plate lamp,
horn, brake light, turn signal, radiator fan (optional)
Fuses
res - 10 A - spare fuses
Info
A defective fuse can be identified by the burned-out fuse wire

.
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are
used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair
fuses.
–
Use spare fuses with the correct rating only.
Fuse (75011088010) ( p. 109)
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
Finishing work
–
Mount the seat. ( p. 56)
15.6 Removing the headlight mask with the headlight
M00188-10
–
Switch off all power consumers.
–
Remove screw

and take off the clamp.
–
Release rubber straps

. Slide the headlight mask up and swing it forward.