KTM 300 EXC, Руководство по ремонту

Страница: 186 / 289

18 ENGINE
184
308120-11
–
Position cover
8
.
–
Mount and tighten screws
9
.
Guideline
Screw, alternator cover M6 8 Nm (5.9 lbf ft)
18.5.26 Installing the spacer
302140-10
–
Before mounting, grease spacer
1
in area
A
and O-Ring
2
.
Long-life grease ( p. 270)
–
Position the O-ring in the cut-out of the spacer.
308118-10
–
Grease the shaft seal ring.
Long-life grease ( p. 270)
–
Push spacer
1
with the O-ring onto the countershaft with a twisting motion.
The cut-out with the O-ring must face inward.
The shaft seal ring rests against the spacer along the entire circumference.
18.5.27 Installing the engine sprocket
308117-10
–
Slide on the engine sprocket with the collar facing the engine. Mount lock ring
1
.
18.5.28 Installing the shift lever
308116-10
–
Position the shift lever. Mount and tighten screw
1
with the washers.
Guideline
Screw, shift lever M6 14 Nm
(10.3 lbf ft) Loctite ® 243™