KTM 250 SX 2019, Руководство пользователя

Страница: 103 / 158

ELECTRICAL SYSTEM 14
101
14.1 Removing the battery (All XC models)
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
1 m (3 ft)
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
9 V
–
Dispose of batteries with less than the minimum voltage correctly.
Preparatory work
–
Press and hold the kill switch while the engine is idling until
the engine stops.
–
Remove the seat. ( p. 64)
F00138-10
Main work
–
Disconnect negative cable
1
from the battery.
–
Pull back positive terminal cover
2
and disconnect the posi-
tive cable from the battery.
–
Remove screw
3
.
–
Pull holding bracket
4
forward and remove battery toward
the top.
14.2 Installing the battery (All XC models)
H00386-10
Main work
–
Position the battery in the battery compartment with the termi-
nals facing forward, and secure with holding bracket
1 .
Battery (HJTZ5S-FP) ( p. 141)
–
Mount and tighten screw
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Connect positive cable
3
to the battery.
Guideline
Screw, battery termi-
nal M5 2.5 Nm
(1.84 lbf ft)
–
Connect negative cable
4
to the battery.
Guideline
Screw, battery termi-
nal M5 2.5 Nm
(1.84 lbf ft)