KTM 2013 450 Rally Factory Replica, Руководство пользователя

Страница: 52 / 126

11 SERVICE WORK ON THE CHASSIS
50
11.20 Installing the main silencer
601351-11
–
Mount the main silencer. Mount and tighten screw
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Attach springs
2
.
11.21 Changing the glass fiber yarn filling of the main silencer
x
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Info
Over a period, the fibers of the insulating material vanish into the air, and the silencer "burns out".
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
–
Remove the main silencer. ( p. 49)
401201-10
Main work
–
Drill out all rivets on the main silencer and remove the steel bands. Carefully ham-
mer the rivets inward.
–
Remove locking cap
1
and outer tube
2
.
–
Pull the glass fiber yarn filling
3
from inner tube
4
.
–
Clean the parts that are to be reinstalled.
–
Wind adhesive tape around the end of the inner tube.
–
Mount the new glass fiber yarn filling on the inner tube.
–
Remove the adhesive tape from the inner tube.
–
Slide the outer tube over the glass fiber yarn filling.
–
Insert the locking cap into the outer tube.
–
Position the steel bands and mount the rivets.
Finishing work
–
Install the main silencer. ( p. 50)
11.22 Removing the fuel tank toward the front
Danger
Fire hazard Fuel is highly flammable.
–
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
–
Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See the notes on refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid contact between fuel and skin, eyes and clothing. Do not inhale fuel vapors. If fuel gets into your eyes, rinse immedi-
ately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If fuel is swallowed, con-
tact a doctor immediately. Change clothing that has come into contact with fuel. Store fuel in a suitable canister according
to regulations and keep it out of the reach of children.
Preparatory work
–
Remove the trim. ( p. 57)
–
Remove the seat. ( p. 48)