KTM 2010 1190 RC8 Скачать руководство пользователя страница 112

Страница: 112 / 258

MAINTENANCE WORK ON FRAME AND ENGINE

110

9.1

Jacking up motorcycle front

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

–

Jack up the motorcycle at the rear. (

p. 111)

700250-01

–

Move the handlebar to the straight-ahead position. Align the work stand at the front
with the adapters to the fork legs.

Front work stand (61029055300)

Info

Always jack up the rear of the motorcycle first.

–

Jack up the motorcycle at the front.

9.2

Taking front of motorcycle off work stand

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

–

Secure the motorcycle against falling over.

–

Remove the work stand from the front.

Содержание 2010 1190 RC8



































































































































































































































































Результаты поиска

Содержание 2010 1190 RC8

Отзывы:

Бренды по названию

Популярные бренды

KTM 2010 1190 RC8, Руководство пользователя

Результаты поиска

Содержание 2010 1190 RC8

Отзывы:

Бренды по названию

Популярные бренды