KTM 2009 250 EXC-F SIX DAYS, Руководство пользователя, Страница: 56 / 125

0 0 B B 0 0 B B
0 0 A A 0 0 A A
MAINTENANCE WORK ON CHASSIS AND ENGINE
54
13.40
Refitting the headlight mask with the headlight (EXC
‑
F, EXC
‑
F SIX DAYS, XCF-W ZA)
600702-11
–
Connect the electric plug connector

.
600703-11
–
Position the headlight mask and fix it with the rubber band

.
Info
Take care with the contact of the holding lug at the fender.
–
Position the brake line and cable harness. Put the clamp on, mount and tighten
screw

.
–
Check the headlamp setting.
13.41
Dismount the start number plate (XCF
‑
W USA, XC
‑
F, SX
‑
F)
500101-10
–
Remove screw

and take off clamp.
–
Remove screw

with the spacing sleeve. Remove the start number plate.
13.42
Installing the start number plate (XCF
‑
W USA, XC
‑
F, SX
‑
F)
500101-11
–
Position the start number plate. Mount and tighten screw

with the spacing
sleeve.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Take care with the contact of the holding lug at the fender.
–
Position the brake line and cable harness. Put the clamp on, mount and tighten
screw

.
13.43
Handlebar position
400223-11
On the upper triple clamp, there are 2 holes at a distance of

to each other.
Distance

between holes 15 mm (0.59 in)
The holes on the handlebar support are placed at a distance of

from the center.
Distance

between holes 3.5 mm (0.138 in)
The handlebar supports can be mounted in 4 different positions.
(250 EXC-F SIX DAYS EU)
The handlebar supports can also be mounted at 2 different heights (with and with-
out spacer).
Thick spacer 9 mm (0.35 in)