KTM 2008 1190 RC8 USA, Руководство пользователя, Страница: 158 / 247

MAINTENANCE WORK ON CHASSIS AND ENGINE
156
9.54
Mounting helmet lock on vehicle
700336-01
–
Remove the seat. ( p. 154)
–
Position the steel cable from the toolset with one loop on the lug

.
Steel cable (60012015000)
–
Guide the steel cable through the helmet opening.
–
Then position the free loop of the steel cable on the lug.
–
Position the helmet carefully on the side of the motorcycle.
–
Fit the seat. ( p. 154)
9.55
Removing the battery
x
Warning
Risk of injury
Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a physician.
–
Switch off all power-consuming components and switch off the engine.
–
Remove the seat. ( p. 154)