KTM 200 DUKE 2021 Скачать руководство пользователя страница 63

Страница: 63 / 119

BRAKE SYSTEM 13

Preparatory work

–

Check the front brake linings. (

p. 61)

C00201-10

Main work

–

Move the brake reservoir mounted on the handlebar into a hori-
zontal position.

–

Remove screws

–

Take off cover

with membrane

–

Add brake fluid to level

Guideline

Dimension

5 mm (0.2 in)

Brake fluid DOT 4 / DOT 5.1 (

p. 107)

–

Position the cover with the membrane. Mount and tighten the
screws.

Info

Clean up overflowed or spilled brake fluid immediately
with water.

13.5

Checking the front brake linings

Warning

Danger of accidents

Worn-out brake linings reduce the braking effect.

–

Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)

Warning

Danger of accidents

Damaged brake discs reduce the braking effect.

If the brake linings are not changed in time, the brake lining carriers grind against the brake disc. As a
consequence, the braking effect is greatly reduced and the brake discs are destroyed.

–

Check the brake linings regularly.

B00739-10

–

Check the brake linings for minimum thickness

Minimum thickness

≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the front brake linings.

–

Check the brake linings for damage and cracking.
» If there is wear or tearing:

–

Change the front brake linings.

Содержание 200 DUKE 2021
























































































































Результаты поиска

Содержание 200 DUKE 2021

Отзывы:

Бренды по названию

Популярные бренды

KTM 200 DUKE 2021, Руководство пользователя

Результаты поиска

Содержание 200 DUKE 2021

Отзывы:

Бренды по названию

Популярные бренды