KTM 1290 SUPERDUKE R Скачать руководство пользователя страница 126

Страница: 126 / 213

BRAKE SYSTEM

124

14.8

Checking the brake linings of the rear brake

Warning

Danger of accidents

Reduced braking efficiency caused by worn brake linings.

–

Change worn brake linings immediately. (Your authorized KTM workshop will be glad to help.)

Note

Danger of accidents

Reduced braking efficiency caused by damaged brake discs.

–

If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are destroyed. Check the brake linings regularly.

500320-10

–

Check the brake linings for minimum thickness



Minimum thickness



≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the rear brake linings.

–

Check the brake linings for damage and cracking.
» If there is damage or cracking:

–

Change the rear brake linings.

Содержание 1290 SUPERDUKE R






















































































































































































































Результаты поиска

Содержание 1290 SUPERDUKE R

Отзывы:

KTM 1290 SUPERDUKE R, Руководство пользователя, Страница: 126 / 213

Результаты поиска

Содержание 1290 SUPERDUKE R

Отзывы: