KTM 1290 Super Duke R, Инструкции по установке

Страница: 10 / 24

3 WORK
8
3.4 Mounting the front rider's seat
S03914-10
Main work
–
Hook recess
1
of the front rider's seat into guide
2
, lower it
at the rear and push it forward.
–
Position the locking pin in the lock housing and push the pas-
senger seat down at the front.
The locking pin engages with an audible click.
–
Check that the front rider's seat is mounted correctly.
Finishing work
–
Mount the passenger seat. ( p. 7)
3.5 Removing the 12-V battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep 12 V batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the 12 V battery.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Caution
Danger of accidents Electronic components and safety devices will be damaged if the 12-V battery is dis-
charged or missing.
If the 12-V battery is discharged or defective, malfunctions in the vehicle electronics can occur, espe-
cially when starting.
–
Never operate the vehicle with a discharged 12-V battery or without a 12-V battery.
Preparatory work
–
Remove the passenger seat. ( p. 7)
–
Remove the front rider's seat. ( p. 7)