KTM 1290 Super Duke R 2018, Инструкции по установке, Страница: 9 / 24

WORK 3
7
3.1 Removing the passenger seat
E00693-10
–
Insert the Race
‑
on key or the black ignition key into the seat
lock
1
and turn clockwise.
–
Lift the passenger seat at the front and pull it out of the
bracket toward the front.
–
Take off the passenger seat.
–
Remove the key.
3.2 Mounting the passenger seat
401922-10
–
Attach the recesses of the passenger seat in guides 1 and
lower the front of the seat while pushing it back.
–
Position locking pin
2
in the lock housing and push the pas-
senger seat down at the front.
The locking pin engages with an audible click.
–
Check that the passenger seat is correctly mounted.
3.3 Removing the front rider's seat
Preparatory work
–
Take off the passenger seat. ( p. 7)
E00694-10
Main work
–
Lift the rear of the front rider's seat.
–
Detach the front of the front rider's seat and take it off.
3.4 Mounting the front rider's seat
401921-10
Main work
–
Attach recesses
1
on the front rider's seat to the fuel tank
and push the front rider's seat forward while lowering it.
Catch 2 is located in the recess.
–
Check that the front rider's seat is mounted correctly.
Finishing work
–
Mount the passenger seat. ( p. 7)