KTM 1290 SUPER ADVENTURE S 2021, Инструкции по установке

Страница: 25 / 29

TECHNICAL DATA 4
23
Screw, sliding seat bushing, wind-
shield M5x20 4 Nm (3 lbf ft)
Screw, splash protection, tail end
lower part M5x12 3 Nm (2.2 lbf ft)
Screw, throttle M5x25 3.5 Nm (2.58 lbf ft)
Screw, top mask spoiler, fuel tank
fairing M5x12 2.5 Nm (1.84 lbf ft)
Screw, windshield M5x14 3.5 Nm (2.58 lbf ft)
Screw, wiring harness cable guide M5x12 5 Nm (3.7 lbf ft)
Tire air pressure sensor
(SUPER ADVENTURE S EU/CN) M5x15 2.4 Nm (1.77 lbf ft)
Clamp, header/silencer M6 10 Nm (7.4 lbf ft)
Ground fitting on frame M6x16 6 Nm (4.4 lbf ft)
Nut, windshield holder on sliding
seat shaft M6 5 Nm (3.7 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, 6-D sensor M6x15 6 Nm (4.4 lbf ft)
Loctite ® 243™
Screw, 6-D sensor retaining
bracket M6x16 10 Nm (7.4 lbf ft)
Screw, ABS modulator fastening M6x16 8 Nm (5.9 lbf ft)
Screw, ball joint of push rod on
foot brake cylinder M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, battery terminal M6x12 4.5 Nm (3.32 lbf ft)
Screw, bottom triple clamp cover M6x12 6 Nm (4.4 lbf ft)
Screw, brake assembly M6 5 Nm (3.7 lbf ft)
Screw, clutch lever assembly M6x25 5 Nm (3.7 lbf ft)
Screw, combination instrument
support M6x18 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, cover part M6 6 Nm (4.4 lbf ft)
Screw, distance radar M6x20 5 Nm (3.7 lbf ft)
Screw, engine guard M6 10 Nm (7.4 lbf ft)
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite ® 243™
Screw, front cellphone storage
compartment M6x14 6 Nm (4.4 lbf ft)
Screw, front sprocket cover M6x25 9 Nm (6.6 lbf ft)
Screw, front wheel speed sensor M6x16 8 Nm (5.9 lbf ft)
Screw, fuel petcock M6x12 6 Nm (4.4 lbf ft)
Screw, fuel pump M6x16 6 Nm (4.4 lbf ft)
Screw, fuel tank on carrier, long M6x15 6 Nm (4.4 lbf ft)
Screw, fuel tank on carrier, short M6x12 6 Nm (4.4 lbf ft)
Screw, header clamp, rear M6x25 8 Nm (5.9 lbf ft)
Screw, headlight on mask support M6x20 8 Nm (5.9 lbf ft)
Screw, preload adjuster clamp M6 6 Nm (4.4 lbf ft)
Screw, preload adjuster on bracket M6 6 Nm (4.4 lbf ft)