KTM 1290 SUPER ADVENTURE R 2018 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 360

KTM 1290 SUPER ADVENTURE R 2018 Скачать руководство пользователя страница 15

SAFETY ADVICE 2

13

2.1

Use definition

–

intended use

The vehicle is designed and constructed to withstand the usual demands of regular traffic and use on gentle ter-
rain (unpaved roads). This vehicle is not suitable for use on race tracks.

Info

This vehicle is only authorized for operation on public roads in its homologated version.

2.2

Misuse

The vehicle must only be used as intended.
Dangers can arise for people, property and the environment through use not as intended.
Any use of the vehicle beyond the intended and defined use constitutes misuse.
Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for the
respective use.

2.3

Safety advice

A number of safety instructions need to be followed to operate the model described safely. Therefore read this
instruction and all further instructions included carefully. The safety instructions are highlighted in the text and
are referred to at the relevant passages.

«
...
13
14
15
16
17
...
»

Содержание 1290 SUPER ADVENTURE R 2018









































































































































































































































































































































































Отзывы:

Нет отзывов