KTM 125 SX 2016, Инструкции по установке

Страница: 10 / 22

3 WORK
8
3.3 Installing the front wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
H00935-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease shaft seal rings

and contact surface

of the spacers.
Long-life grease ( p. 18)
–
Insert the spacers.
H00002-11
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw

.
Guideline
Screw, front wheel spindle M20x1.5 35 Nm
(25.8 lbf ft)
–
Operate the hand brake lever several times until the brake linings are lying correctly
against the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 7)
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws

.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
3.4 Installing the footrests
Info
The procedures are the same on both footrests.
Condition
–
The frame protectors have been removed on the left and right.
D00674-10
(All 125/150 models)
–
Position the new footrest and pin.
Info
Only insert the pin to the extent that the spring can still be mounted.
S00976-10
–
Press the spring with special tool

.
Pliers for footrest spring (79029083000)
The special tool is applied to area

on the footrest.
–
Mount pin

.