KTM 125 EXC EU 2014, Инструкции по установке

Страница: 9 / 27

2 SETUP
7
800035-10
(All 200/250/300 models)
Warning
Risk of injury Battery acid and battery gases cause serious chemical
burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in
well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If
battery acid gets in the eyes, rinse with water for at least 15 minutes
and contact a physician.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. ( p. 12)
–
Install the battery. ( p. 13)
B00097-01
–
Unpack and mount the KTM PowerParts included in the delivery (optional).
Info
Read the accompanying KTM PowerParts fitting instructions.
–
Apply the label included in the delivery (optional).
101037-01
(All EXC models)
–
Mount the mirror clamps on both sides.
B00909-01
–
Mount and tighten the rear mirror on both sides.
–
Mount the reflector.
(125 EXC EU, all 200 models, 250/300 EXC EU, XC-W, EXC AUS)
–
Set kilometers or miles. ( p. 16)
–
Adjust the speedometer functions. ( p. 17)
–
Set the clock. ( p. 17)
(250/300 SIX DAYS, 125 EXC SIX DAYS EU)
–
Set kilometers or miles. ( p. 18)
–
Set the speedometer functions. ( p. 18)
–
Set the clock. ( p. 18)
–
Position all controls in their exact positions on the handlebar. Tighten all screws.
–
Refuel. ( p. 16)
–
Print out the current PDI form found on KTM DEALER.NET and perform the
pre-delivery inspection.