KTM 125 Duke 2017 Скачать руководство пользователя страница 187

Страница: 187 / 202

SUBSTANCES

185

Brake fluid DOT 4 / DOT 5.1

Standard/classification

–

DOT

Guideline

–

Use only brake fluid that complies with the specified standard (see specifications on the container) and that exhibits the corresponding
properties.

Recommended supplier
Castrol

–

REACT PERFORMANCE DOT 4

Motorex

–

Brake Fluid DOT 5.1

Coolant

Guideline

–

Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade and unsuitable antifreeze
causes corrosion, deposits and frothing.

–

Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion protection and lubrication proper-
ties.

–

Only use coolant that complies with the requirements stated (see specifications on the container) and that has the relevant properties.

Antifreeze protection to at least

−

25 °C (

−

13 °F)

The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant needs to be diluted.

The use of premixed coolant is recommended.

Содержание 125 Duke 2017











































































































































































































Результаты поиска

Содержание 125 Duke 2017

Отзывы:

Бренды по названию

Популярные бренды

KTM 125 Duke 2017, Руководство пользователя

Результаты поиска

Содержание 125 Duke 2017

Отзывы:

Бренды по названию

Популярные бренды