KTM 1190 RC8 R Track, Руководство пользователя

Страница: 74 / 127

WHEELS, TIRES
72
12.5
Removing the rear frame sliders
101263-10
–
Remove screw

.
–
Take off frame slider

.
–
Pull the second frame slider with the linkage arm out of the wheel spindle.
12.6
Installing the rear frame sliders
101263-11
–
Position the frame slider with the linkage arm in the wheel spindle.
–
Mount frame slider

on the linkage arm.
–
Mount and tighten screw

.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
12.7
Removing the rear wheel
x
–
Raise the rear of the motorcycle with lifting gear. ( p. 54)
–
Remove the rear frame sliders. ( p. 72)
100722-10
–
Remove nut

.
–
Remove chain adjuster

.
–
Remove axle

.
100723-01
–
Push the rear wheel as far forward as possible and then remove the chain from the
rear sprocket.
Warning
Danger of accidents Reduced braking efficiency caused by damaged brake
discs.
–
Always lay the wheel down in such a way that the brake discs are not
damaged.
–
Take the rear wheel out of the swingarm carefully without damaging the rim or
brake disc.
Info
Do not operate the foot brake when the rear wheel is removed.