KTM 1190 RC8 AUS, Руководство пользователя

Страница: 147 / 250

MAINTENANCE WORK ON FRAME AND ENGINE
145
100721-10
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the
brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
–
Clean screw

and axle

.
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw

.
Guideline
Bolt, front axle M25x1.5 45 Nm
(33.2 lbf ft)
100719-11
–
Position the brake calipers and check that the brake linings are seated correctly.
–
Mount screws

on both brake calipers but do not tighten yet.
–
Operate the hand brake lever repeatedly until the brake lining presses up against the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
The brake calipers align themselves.
–
Tighten screws

on both brake calipers.
Guideline
Screw, front brake caliper M10x1.25 45 Nm
(33.2 lbf ft) Loctite ® 243™
–
Release the fixation of the hand brake lever.
–
Take the front of the motorcycle off the work stand. ( p. 100)
–
Take the rear from the work stand. ( p. 101)