6
ENGLISH
- Remove cover
.
NOTE
To do this, press the holding lugs together from the inside and push
the cover outwards.
- Mount heater switch
.
Holding lugs engage.
- Plug in connector for heater switch
(small white connector).
- Position activated charcoal
fi
lter
.
- Mount screws
and tighten to 8 Nm.
Make sure that the wiring harness
remains free.
- Plug connector for the passenger seat heating
into the passen-
ger seat
(included).
- Mount passenger seat
(see Owner’s Manual).
Route the cable properly and secure with a cable tie. Ensure
that the cables are not kinked or pinched. Check the cable rout-
ing to ensure that there is no cha
fi
ng.
Final steps
- Mount the front rider’s seat (see Owner’s Manual).
