11
- Route fog light cables on both sides through the cable grommets.
Route the wiring harness
- Remove screws
(8
with bearing sleeve and rubber bushing.
- Disconnect connector
(9
.
- Pull off vent hose
(:
.
- Remove the cable tie(s).
- Pull off vent hose
)1
.
- Remove screws
)2
with bushings.
- Raise the fuel tank and pull to the rear.
- Remove screws
)3
.
- Mount retaining bracket
(included) with screws
)3
and tighten.
ENGLISH
- Route wiring harness (included) without tension toward the head-
light as shown.
- Mount relay
(included with wiring harness) on the retaining
bracket
.
- Join plug-in connector
)4
together.