manualshive.com logo in svg

KTI KGS-612F, Руководство пользователя, Страница: 27 / 66

Поделиться
Скачать
KTI KGS-612F Скачать руководство пользователя страница 27

-27-

Configuration

Description

MAC Address

The MAC address factory configured for the switch
It can not be changed in any cases.

S/W Version

The firmware version currently running

H/W Version

The hardware version currently operating

Active IP Address

Currently used IP address for the switch management

Active Subnet Mask

Currently used subnet mask for IP address for the switch management

Active Gateway

Currently used gateway IP address for the switch management

DHCP Server

Current IP address of the DHCP server

Lease Time Left

The time left for the lease IP address currently used

DHCP Enabled

Use DHCP to get dynamic IP address configuration for the switch

Fallback IP Address

IP address used when DHCP mode is not enabled

Fallback Subnet Mask

Subnet mask for IP address used when DHCP mode is not enabled

Fallback Gateway

Default gateway IP address used when DHCP mode is not enabled

WDT

Enable WDT (Watch Dog Timer)

Management VLAN

Set management VLAN information

- VID

VLAN ID configured for web management to the switch

- CFI

CFI value for web reply packets from the switch

- User priority

Priority value for web reply packets from the switch

Name *

Set the system name for this switch unit

Password

Set new password

SNMP enabled

Enable SNMP agent

SNMP Trap destination

The IP address of the SNMP trap manager

SNMP Read community The community allowed for the SNMP [

get

] message

SNMP Write community The community allowed for the SNMP [

set

] message

SNMP Trap community

The community used for the SNMP trap messages sent by the switch

[Apply]

Click to apply the configuration change

[Refresh]

Click to refresh current configuration

Note:

1. It is suggested to give each switch unit a system name as an alternative unique identifica-

tion beside IP address.

2. Setting change of DHCP mode takes effective in next bootup.

3. A watch dog timer (WDT) is a hardware timing device that triggers a system reset if the

system firmware, due to some fault condition, such as a hang, neglects to regularly service
the watch dog timer . The intention is to bring the system back from the hung state into
normal operation. The timer is set to 1.72 seconds in this switch.

Содержание KGS-612F



































































Отзывы:

Нет отзывов