-3-
1. Introduction
The 100BASE-TX to 100BASE-FX single fiber media converter series provides
a media conversion allowing high-speed integration of fiber optic and twisted-
pair segments.
With WDM technology, the converters uses one single fiber cable instead of
duplex fiber cable for data transmission. A complete set of LEDs allows for quick
status verification.
The converters also provide the following key features:
•
Compliance with IEEE 802.3u standard
•
Auto-negotiation function built in twisted-pair port that allows to
operate at optimal configuration connecting to an auto-negotiation
capable device
•
Extending network span up to 30km over dual wavelength single
strand single mode fiber cabling
•
Tremendous cost saving of single mode optic fiber cable
•
Providing both MDI jack and MDI-X jack on the twisted-pair
interface for flexible UTP cable selection
The converter series support the following configuration needs:
100BASE-TX to 100BASE-FX single mode SC (30Km)
KC-201-W3-S3
Tx 1310nm, Rx 1550nm
KC-201-W5-S3
Tx 1550nm, Tx 1310nm
