-26-
Configuration
Description
MAC Address
The MAC address factory configured for the switch
It can not be changed in any cases.
S/W Version
The firmware version currently running
H/W Version
The hardware version currently operating
Active IP Address
Currently used IP address for the switch management
Active Subnet Mask
Currently used subnet mask for IP address for the switch management
Active Gateway
Currently used gateway IP address for the switch management
DHCP Server
Current IP address of the DHCP server
Lease Time Left
The time left for the lease IP address currently used
Temperature
The junction temperature sensed in the main chip
DHCP Enabled
Use DHCP to get dynamic IP address configuration for the device
Fallback IP Address
IP address used when DHCP mode is not enabled
Fallback Subnet Mask Subnet mask for IP address used when DHCP mode is not enabled
Fallback Gateway
Default gateway IP address used when DHCP mode is not enabled
Name
Set the system name for this switch unit
Note: It is suggested to give each device unit a system name as an alternative unique
identification beside IP address.
Password
Set new password
Inactivity Timeout
Timeout for auto logout (unit: second)
SNMP enabled
Enable SNMP agent
SNMP Trap destination The IP address of the SNMP trap manager
SNMP Read community The community allowed for the SNMP [get] message
SNMP Write community The community allowed for the SNMP [set] message
SNMP Trap community The community used for the SNMP trap messages sent by the switch
Power Saving Mode
Enable / disable power saving function
Apply
Click to apply the changes.
Refresh
Click to refresh the page. Any changes made locally will be undone.
