-10-
2. Installing the Switches
2.1 Unpacking
Check to see that you have everything before you start the installation.
•
Installation guide
•
The switch unit
•
Rubber magnet stand
•
One AC power adapter for the unit
2.2 Supply the Power
Checking AC Power
Before you begin the installation, check the AC voltage of your area. The
AC power adapter which is used to supply the DC power for the unit should
have the AC voltage matching the commercial power voltage in your area.
The specifications of the AC power adapter are:
•
AC input power:
AC power voltage of your area
•
DC output power:
7.5V VDC min. 1.0A
•
DC plug type:
DC IN Jack
The DC power jack for the AC power adapter is located on the rear of the
switch. Refer to section 1.2 drawing.
Installing the Switch
1. Install the switch with the AC power adapter provided.
