[Stack]
command group.
>Stack
↵
The keywords and parameters in stack command group are same as described in section 3.1.
<sid>: Switch
ID
<mst_elect_prio>
Master election priority
<mac_addr> MAC
address
3.2 IP Configuration for Stack
Although a stack is composed of multiple managed switches connected together via stack ports and each might
have been configured with different IP address, the stack can be accessed by a single IP address to all the
member switches. The IP address of the elected master switch is used as the IP address of the stack.
The switch is shipped with the following factory default settings for software management:
Default
IP address of the switch:
192.168.0.2 / 255.255.255.0
Fixed Username:
admin
Default password:
The switch uses local authentication instead of RADIUS authentication with factory defaults.
No password is required with factory default. However, the password is used for local authentication in
accessing to the stack via console, telnet and Http web-based interface. For security reason, it is recommended
to change the default settings for the stack before deploying it to your network.
-31-
